Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 5th wheel makes crunching, metal twisting sounds in reverse


RV-Dreams Community Member

Status: Offline
Posts: 8
Date:
5th wheel makes crunching, metal twisting sounds in reverse


I am a total n00b RVer, but we're full-timing it soon while the old house we bought gets renovated. I bought the fifth wheel and the first night we arrived home, I had to do some maneuvering in reverse to turn around in a cul-de-sac. When I reversed, the trailer and truck were angled and the RV started making horrible metal, twisting, crunching sounds coming from the wheel areas. I freaked out and pulled forward, and handed the reigns to my husband. It also made that sound for him if the RV was at all angled from the truck, and slightly less when straight, with the truck.

Any idea what this could be? I think I have hydraulic brakes (I really need to call the manufacturer and get a manual), could those be making noices like that? Did we break something in the axle? I have to move it again tomorrow, and I'm so nervous. redface.gif

__________________


RV-Dreams Family Member

Status: Offline
Posts: 1438
Date:

It sounds like something with the brakes. Some brakes readjust automatically when you go backwards and maybe the linings are worn and are scraping.

I would have a brake specialist inspect them.

Good luck

__________________
Fred Wishnie

Full time since Feb 06 in Carriage Cameo 35KS3 and Ford F350


“If all you ever do is all you’ve ever done, then all you’ll ever get is all you ever got.”


RV-Dreams Family Member

Status: Offline
Posts: 642
Date:

Backing a trailer makes some strange noises. Most often it is as Fred sez, brakes. Depending on the brake controller, you may be able to disable the brakes while backing by pressing and holding BOOST for 5 seconds. Otherwise, unless the trailer is new, it may be some worn suspension elements, or a lack of lube if so equipped. Another thing, you say the truck and trailer were at an angle, could it have been tire scrape on the roadway contributing to the noise. For sure, if at an angle, the suspension is complaining bitterly about your abuse (LOL). Some noise is normal, even going straight down the road. Open the rear window on the towing vehicle and try it. Scary.

__________________
Ken and Fran 2006 Sunnybrook F250 SD CC PSD


RV-Dreams Family Member

Status: Offline
Posts: 1426
Date:

53Merc is correct,watch the tire sidewalls sometime when you are making a sharp turn backing up.Was your foot on the brakes when this noise hapens? The suspension moves a lot by design when doing this.Like Fred said I would probably have the brakes looked at but you will soon get used to the creaks and groans.

__________________

RVing probably not a reality any more.It was a good time while it lasted.



RV-Dreams Family Member

Status: Offline
Posts: 1337
Date:

As others have said there will be noises. These noises will be different from what a car or truck will make.

Here's examples:

Brake Noise can be quite loud-
The brakes (if electric) will make a click type sound as they engage or disengage.
Hydraulic brakes may make a clunk type sound

The trailer suspension will make a squeak and/or squeal as the trailer rocks and rolls. These sounds can also be quite loud depending on the suspension design.

If you put all those sounds together, it can sometimes sound like a serious mechanical problem, especially if your turning or going over bumps.

You should have a mechanic or longtime RV'er check to make sure the sounds are normal.

__________________

"Small House, Big Yard "

"May the FOREST be with you"
Alfa See-Ya 5'er and 2007 Kodiak C4500 Monroe



RV-Dreams Community Member

Status: Offline
Posts: 8
Date:

Thanks, I wondered if it was the brakes. It's a 2004 Wildcat RV, and I think it has hydraulic brakes.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us