Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
RV-Dreams.com Home -> RV-Dreams Community Forum -> RV Maintenance and Technical Tips -> Thoughts on power washing the rig
Post Info TOPIC: Thoughts on power washing the rig
Neil and Connie


RV-Dreams Family Member

Status: Offline
Posts: 813
Date:
Thoughts on power washing the rig
Permalink  

Is there any reason not to get a household power washer to clean the rig with? We've got a fiberglass roof so no worries about tearing rubber…and obviously I would be careful not to inadvertently unseat any of the caulking on roof seams or penetrations…but just wondering if it's completely safe for use on fully painted rigs…NH doesn't have any decals.

I've seen numerous bloggers that talk about power washing but I would think that as long as you used the wand that spreads the spray out a little to reduce impact pressure it's probably plenty safe…and it's surely easier than using a bucket and brush.

Secondary question…what's the best no-buffing wax to use, Zipwax? Doing the whole rub on/let dry/buff routine is just way too much work.

 



-- Edited by Neil and Connie on Saturday 30th of July 2016 08:46:03 AM

__________________
Rob_Fla


RV-Dreams Family Member

Status: Offline
Posts: 357
Date:
Permalink  

I would never use a Power Washer on my rig, the possibility of blowing a seal, seam, joint out alone is too much risk, plus if you hit one of the dual pane windows or clearance lights with it, you could blow the seal out of them too.

Just not worth the risk for me :)



-- Edited by Rob_Fla on Saturday 30th of July 2016 08:43:38 AM

__________________

Robert & Sheryl

2014 Redwood 38FL MorRyde IS & MorRyde Pin Box

2018 RAM 3500 DRW Cummings H.O. / 4.10

 

 
Neil and Connie


RV-Dreams Family Member

Status: Offline
Posts: 813
Date:
Permalink  

Thanks Bob…one would need to be careful around seams, slide seals, lights and such…and I think one of the 'baby' power washers with lower pressure and an adjustable wand that widens the spray out would be fine. I'm not as concerned about seals as making sure it won't do anything to the paint itself.

I figure that careful aiming of the sprayer with maybe some hand brushing right around windows and seals if necessary would provide adequate protection for seals and water leaks.

 



__________________
bjoyce


RV-Dreams Family Member

Status: Offline
Posts: 3722
Date:
Permalink  

A friend just talked about this in his blog - http://ourrvadventures.com/2016/07/wax-on-wax-off-2/.    He uses a Karcher K2 Plus, which is under $100 from Amazon.  It is not as powerful as a commercial model, but does the job and should be safe.



__________________

Bill Joyce,
40' 2004 Dutch Star DP towing an AWD 2020 Ford Escape Hybrid
Journal at http://www.sacnoth.com
Full-timing since July 2003
Lucky Mike


RV-Dreams Family Member

Status: Offline
Posts: 2950
Date:
Permalink  

I have lugged a small one around for a few years.....I find it better than the brush and hose method.......it removes the bigger scuffing dirt that the brush normally picks up prior to brush washing...uses half the water and allows rinsing the under carriage.......wash the motor down......clean the BBQ .......and teach that little kid with the power soaker what its like to have a super one !!!!


__________________

 1998 ...Harney Renegade DP  class A

rers1@mail.com

 

My Service dog and life partner " Nikki"......Klee Kia Miniature Husky....(she Runs the ship!!)

We are not lost in the Woods.....Just Extreme boondocking!!!!!!
TRAILERKING


RV-Dreams Family Member

Status: Offline
Posts: 1509
Date:
Permalink  

Lucky Mike wrote:

 .......and teach that little kid with the power soaker what its like to have a super one !!!!

biggrin



__________________

My Dreams...............Her Nightmares.

 
Second Chance


RV-Dreams Family Member

Status: Offline
Posts: 396
Date:
Permalink  

Rob_Fla wrote:

I would never use a Power Washer on my rig, the possibility of blowing a seal, seam, joint out alone is too much risk, plus if you hit one of the dual pane windows or clearance lights with it, you could blow the seal out of them too.

Just not worth the risk for me :)



-- Edited by Rob_Fla on Saturday 30th of July 2016 08:43:38 AM

I'm with the other Rob on this one... I prefer a good rinsing before a soft (designed for RVs and trucks) brush on an extendable pole. We just did ours top-to-bottom two weeks ago. What a difference after two months of volunteer camp hosting in a National Forest campground in North Carolina!

Rob



__________________

2012 F350 DRW Lariat 6.7

PullRite OE 18K, Demco Glide Ride pinbox

2020 Solitude 310GK-R, MORryde IS, disc brakes, solar, DP windows

Full-time as of 8/2015

 

 
Neil and Connie


RV-Dreams Family Member

Status: Offline
Posts: 813
Date:
Permalink  

Thanks Bill…that post by Greg was what got me started down this path. So far…I usually wash when we arrive in Fort Myers and again just before we leave but waxing/buffing is more effort than I'm interested in putting in. Guess I should look into having one of the services come by this winter and do it for us.

 



__________________
Clay L


RV-Dreams Family Member

Status: Offline
Posts: 246
Date:
Permalink  

Neil and Connie wrote:

Thanks Bill…that post by Greg was what got me started down this path. So far…I usually wash when we arrive in Fort Myers and again just before we leave but waxing/buffing is more effort than I'm interested in putting in. Guess I should look into having one of the services come by this winter and do it for us.

 

 I used a a wash and wax service several times in AZ where we spent all or most of 9 winters. They did a good job and were careful with the power washer. They used a fan spray nozzle and a brush for areas close to seams, windows, etc. The non-buff wax they used was only good for 6 or 7 months though.  



__________________

Clay (WA5NMR), Lee (wife), Katie, Kelli (cats) Full timed for eleven years in a 2004 Sightseer 35N. Snowbirds for one winter and now settled down in CO.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
RV-Dreams.com Home -> RV-Dreams Community Forum -> RV Maintenance and Technical Tips -> Thoughts on power washing the rig
Tweet this page Post to Digg Post to Del.icio.us