Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Question about Verizon Hot Spot?


RV-Dreams Family Member

Status: Offline
Posts: 911
Date:
Question about Verizon Hot Spot?


I'm getting 2 to 3 bars (signal) 4G LTE without the Wilson Sleek and 4 to 5 bars with it and can't get internet through it.  My computer sees it, connects and can't get past the identifying part.  Any clues?

 

Need some help,

 

Red



__________________

Full timing since 2/27/14.

Silverado HD 3500 4X4 Dually.

Momentum 380 by Grand Design.



RV-Dreams Family Member

Status: Offline
Posts: 1248
Date:

When this happens to me, Mitch usually has me do (in a DOS window) ipconfig / release and then ipconfig /renew. Also reboot the computer and close and reopen the browser. If all that doesn't work, he plays with some adapter settings in the network management section of the control panel. I'll try to have him answer the question a bit better later, if you haven't already found a solution.

__________________

Cheryl B. in her new RV

(well, not new any more! Full timing since 6/25/14)

2008 DRV MS 36TKBS3 (the CoW: Castle on Wheels), 2005 Ford F550 hauler (the Bull)

My blog is http://mitcheryl-rv-journey.blogspot.com/

My business: www.AZAdminSolutions.com



RV-Dreams Family Member

Status: Offline
Posts: 911
Date:

I'll reboot the computer, but the same thing is happening on the ipad too.

__________________

Full timing since 2/27/14.

Silverado HD 3500 4X4 Dually.

Momentum 380 by Grand Design.



RV-Dreams Family Member

Status: Offline
Posts: 120
Date:

el Rojo and Pam wrote:

I'm getting 2 to 3 bars (signal) 4G LTE without the Wilson Sleek and 4 to 5 bars with it and can't get internet through it.  My computer sees it, connects and can't get past the identifying part.  Any clues?

 

Need some help,

 

Red


 The problem is the data pipe on the sleek . Even though it increase the RSSI it can actually restrict the flow of data . Only use the sleek when absolutely necessary . With a signal of 2 to 3 bars you should be fine without amplification . If a smaller gain is needed . Millenicom sells an external antenna  and adapter at a good price for the hot spots. and can give up to 14 DB gain by itself.



-- Edited by Max Signal on Wednesday 8th of October 2014 12:20:31 PM

__________________

http://www.maximumsignal.net/

Cellular Reception Experts



RV-Dreams Family Member

Status: Offline
Posts: 679
Date:

Do you have any other Verizon cellular data enabled devices.. like a phone or tablet? Are they getting online? That would rule out a local tower issue.

What about when turning off the Sleek and just using the MiFi? That would rule out the Sleek.

Have you successfully used this setup in other locations? That would rule out the setup.



__________________

Cherie (and Chris) / Our blog: Technomadia.com

Full time since 2006 as Gen-X 'technomads' (technology enabled nomads)

RV Mobile Internet Resource Center (unbiased information by RVers for RVers)

zephyr_pixel.jpgRV: 1961 GM 4106 Bus

Toad: 2009 MINI Cooper



RV-Dreams Family Member

Status: Offline
Posts: 911
Date:

Max Signal wrote:


 The problem is the data pipe on the sleek . Even though it increase the RSSI it can actually restrict the flow of data . Only use the sleek when absolutely necessary . With a signal of 2 to 3 bars you should be fie without amplification . If a smaller gain is needed . Millenicom sells an external and adapter at a good price for the hot spots. and can give up to 14 DB gain by itself.


 I can usually get good internet with 3 bars of 3g.  And I swear I paid the bill. lol



__________________

Full timing since 2/27/14.

Silverado HD 3500 4X4 Dually.

Momentum 380 by Grand Design.



RV-Dreams Family Member

Status: Offline
Posts: 911
Date:

Update:

Here we are 2 days later and other than reboot I didn't do or change anything and we seem to be running fine.

__________________

Full timing since 2/27/14.

Silverado HD 3500 4X4 Dually.

Momentum 380 by Grand Design.



RV-Dreams Family Member

Status: Offline
Posts: 911
Date:

Technomadia wrote:

Do you have any other Verizon cellular data enabled devices.. like a phone or tablet? Are they getting online? That would rule out a local tower issue.

What about when turning off the Sleek and just using the MiFi? That would rule out the Sleek.

Have you successfully used this setup in other locations? That would rule out the setup.


 Sorry for not responding Cherie and Chris, I didn't see your post until this morning.

 

It was slow on both the ipad and laptop. It must have been the tower since this is how I have always connected.  When we have had this problem before we just switched from my phone (Samsung S4  4G) to Pam's phone a droid 3G and hers would work, what's the deal with this?  We suspended her service since we no longer need 2 phones...we're joined at the hip now. 

 

Thanks Red



__________________

Full timing since 2/27/14.

Silverado HD 3500 4X4 Dually.

Momentum 380 by Grand Design.

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us