Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Why is the light not working?


RV-Dreams Family Member

Status: Offline
Posts: 53
Date:
Why is the light not working?


The LED light fixture over the lavatory did not come on when last time tried.  We thought it was just a simple bulb change. No go, could not open it anywhere to get at the bulb.  Took the fixture out and bought another one that fit, wired it up and NOTHING. Checked the fuses, so he said. What to do now?  Thank you, we are all new to this and appreciate your help with things.  Piggy in La.



__________________


RV-Dreams Family Member

Status: Offline
Posts: 2950
Date:

take your multi meter and check for voltage on the wires.......and eliminate that first......could be a bad ground or a bad hot wire


__________________

 1998 ...Harney Renegade DP  class A

rers1@mail.com

 

My Service dog and life partner " Nikki"......Klee Kia Miniature Husky....(she Runs the ship!!)

We are not lost in the Woods.....Just Extreme boondocking!!!!!!



RV-Dreams Family Member

Status: Offline
Posts: 911
Date:

Check the wires on the switch too.

__________________

Full timing since 2/27/14.

Silverado HD 3500 4X4 Dually.

Momentum 380 by Grand Design.



RV-Dreams Family Member

Status: Offline
Posts: 182
Date:

Second checking the switch. I had a light that didn't work I got new bulbs and that didn't fix it. I checked for power and found there wasn't power to the light. Turned out to be a bad switch.


__________________

http://buckstravelnews.wordpress.com/

 

Dave and Marge

2005 Freightliner M2 Sport

2008 36RSSB3 Mobile Suite



RV-Dreams Family Member

Status: Offline
Posts: 53
Date:

The other light in the bath room, runs off same switch, is working fine. So anything else I should try?  thank you



__________________


RV-Dreams Family Member

Status: Offline
Posts: 1509
Date:

piggy wrote:

The other light in the bath room, runs off same switch, is working fine. So anything else I should try?  thank you


 See post #2.........

Multi-meter out and check, check, and triple check. Start at one spot and work your way to the other end. Could be a bad wire(broken) or bad connection. Multi-meter is the only way you're going to troubleshoot it.



__________________

My Dreams...............Her Nightmares.

 



RV-Dreams Family Member

Status: Offline
Posts: 53
Date:

No power at the wire that the light connects to.

I wonder where the other end terminates to? All fuses in the main terminal ore O.K.

 



__________________


RV-Dreams Family Member

Status: Offline
Posts: 1509
Date:

Next point to check then would be at the switch. If there's power going through that then you'll have to check the entire wire run from between the switch all the way to the light fixture.

__________________

My Dreams...............Her Nightmares.

 



RV-Dreams Family Member

Status: Offline
Posts: 5399
Date:

I can never remember this right, but if the one light is operating separately, I think that means that they are NOT wired in series.  If the wiring was done in series, I think both lights would stop working.  So, considering parallel wiring, check the wiring going from the one working light to the non working light.  If there is a bad "spade lug" at that light, it would create your problem.  It could be a bad lug at either light, as far as that goes.

I had a bad spade lug on one of our bathroom lights a while back and I found that the wire had slipped out of the "crimped" spade.  Since it was crimped, I couldn't get the whole wire back in, so I had to go buy some more lugs.

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 3722
Date:

Many RV manufacturers use quick splice connectors where you insert two wires and close them, no wire stripping or crimping tool needed. They are notorious for failing.  They look something like this:

http://bentronics.com/images/quicksplice.jpg



__________________

Bill Joyce,
40' 2004 Dutch Star DP towing an AWD 2020 Ford Escape Hybrid
Journal at http://www.sacnoth.com
Full-timing since July 2003

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us