Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Water hose max pressure?


RV-Dreams Family Member

Status: Offline
Posts: 813
Date:
Water hose max pressure?


Anybody know what most RV water hoses are rated at pressure wise…a check at Amazon didn't have one on the product detail page? We've had issues with our Watts 263A regulator rusting around the adjustment screw…at lots of campgrounds the hose bib leaks a bit so the regulator tends to stay wet and hence rusts…so I'm considering whether to move the regulator off of the hose big and put it next to the rig with our filter setup.

I realize that this leaves the hose unprotected against high pressure; but if your typical RV hose is rated for say 100 psi then we'll rarely if ever find a campground where needing to protect the hose is important.

I am also going to order a set of stainless steel replacement screws from waterfilterstore.com…but figured I would see what most of the rest of us are doing regarding where the regulator goes in the string from bib to rig connection.

Thanks.

 



__________________


RV-Dreams Family Member

Status: Offline
Posts: 1417
Date:

We have never had a problem with pressure, our water filter system reduces the pressure going in just by its own design and hoses would rarely if ever be a problem.....

__________________
GOING FOR IT


RV-Dreams Family Member

Status: Offline
Posts: 3721
Date:

Our highest water pressure is at my sister-in-laws house, about 130psi. I learned not to use an old water hose there, it sprung a leak. No problem with a newer hose. We have our RV Water Filter Store pressure regulator in the water bay to protect the inside plumbing, not the water hose.



-- Edited by bjoyce on Sunday 3rd of November 2013 09:11:12 AM

__________________

Bill Joyce,
40' 2004 Dutch Star DP towing an AWD 2020 Ford Escape Hybrid
Journal at http://www.sacnoth.com
Full-timing since July 2003



RV-Dreams Family Member

Status: Offline
Posts: 806
Date:

Most pressure regulators only regulate pressure while the water is flowing. Once the water is turned off the pressure in the line increases to the static pressure all the way to the faucet.

__________________

MarkS & Jackie
MSgt, USAF, Ret
2004 Volvo 780 530 HP Cummins 13 speed
2014 Trilogy 3650RE
fulltime since Oct 8, 2016



RV-Dreams Family Member

Status: Offline
Posts: 5399
Date:

I'm not sure that the Watts regulators fall into the category of one that "only regulate while the water was running."  At least, I've not seen that with ours.  Some of those that one buys at RV parts places that is basically a non-adjustable "regular" are actually only "flow regulators" and not pressure regulators.  Those would definitely allow the pressure to increase after one stops the flow of the water.

When we got our Watts, I wrote a blog entry on our regulator and it includes a picture of the "flow regulator."

Review of Watts 263A Water Pressure Regulator

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 813
Date:

Thanks all, I think I will go ahead and move the Watts regulator to the filter assembly bucket and take it off the spigot. We've never really seen water pressure more than about 70 psi anyway and I'm sure the hoses are good for more than that. I'm just trying to eliminate the corrosion issue on the regulator adjustment screw at this point.

 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us