Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Quickest Sat Dish Setup


RV-Dreams Family Member

Status: Offline
Posts: 1337
Date:
Quickest Sat Dish Setup


In the past years since we first bought a Dish Satellite setup for the RV it has taken as much as 3 days to get the tripod, dish and cabling hooked up and a good signal to the receiver.  On a good day it usually takes 30 minutes to get setup and a good signal.   I'm proud to say on July 6th it took less than 10 minutes.

I put together the tripod, plumbed and leveled it, attached the satellite dish and pointed it in the direction I thought 162° would be.  When I went in the RV to check the signal it showed a strength of 39 and locked...  I went back out and moved the dish 1/4 of an inch to the right and the signal jumped to 70 and locked.  I tightened everything down while I had a big smile on my face.

By the way the 3 day nightmare took place in Quartzite, we had a clear shot with no obstructions anywhere near the RV.  No matter where I placed the dish, I couldn't get a signal.  I walked over to other RVers to see if thay had had problems.... No was the answer.   For 3 days in between assisting customers at our booth I would try to get a signal.  I finally moved the sat dish closer to a chain link fence and boom the signal locked.  Not being a sat expert, I'm guessing somehow the fence was interfering with the signal and I was finally able to get the dish past the point where the interference was occurring by moving really close to it.  The dish was always a few inches higher than the top of the fence so I never considered the fence as a problem.



__________________

"Small House, Big Yard "

"May the FOREST be with you"
Alfa See-Ya 5'er and 2007 Kodiak C4500 Monroe



RV-Dreams Family Member

Status: Offline
Posts: 116
Date:

After trying to aim a Dish dish 3 or 4 times, I said the heck with this and bought the dish Tailgater system. Set the dish in place point the handle north, plug in and run the switch check on the receiver and then wait for the system/programing to down load. Never easier!!!!

__________________

2012 Winnebago "Journey To Insanity" 40U

2008 Dakota 4x4

2004 Subaru Baja -DW's

2005 Honda Shadow Aero - TOAD for now.



RV-Dreams Family Member

Status: Offline
Posts: 357
Date:

We still use a TriPod and aim it manually.
Typically takes about 5 minutes.
I use the DishPointer App on my I Phone and a AccuTek III Meter so I can peak all 3 satellite for HD Service.
We move every couple of weeks or so, took a few times to get proficient, but now no big deal.
Have about 60' of cable on the dish so I can move it around when trees are in the way.

__________________

Robert & Sheryl

2014 Redwood 38FL MorRyde IS & MorRyde Pin Box

2018 RAM 3500 DRW Cummings H.O. / 4.10

 

 



RV-Dreams Family Member

Status: Offline
Posts: 2074
Date:

Yep, the secret to dish pointing, if you want to call it that, is a perfectly plumb tripod such that you can put in the elevation number based on your location and then elevation will be real close.  But that only works if the tripod is perfectly plumb.  Then finding the azimuth based on a compass heading becomes much easier.  A signal meter at the dish, IMO, is also a real big help as opposed to the DW yelling out the window. :)



__________________

Bill & Linda



RV-Dreams Family Member

Status: Offline
Posts: 434
Date:

Depending on which part of the US one typically travels, the two adjustments will not need to be changed much. As an example, I've been in the mid-west this summer and when moving those two have been in a range of 48-53 degrees elevation and 185 - 210 side to side. I always start with elevation since it is a much narrower range to get locked in.

I'm going to open a can of worms, but I'd like some suggestions as to the best satellite signal finder - preferable under $25. I lost my headset type signal generator. It was a 30 second breeze to get a lock on the signal with that, but unfortunately I can find no one who makes them any longer.

__________________

When it comes to the hereafter, I want to be in the no smoking section. 



RV-Dreams Family Member

Status: Offline
Posts: 5398
Date:

Rick,

I don't know what you had before, so this is a shot in the dark.

Bestway Satellite Finder with free Accessories

Not sure about this one as it doesn't have a meter, just an audible tone.

Bestway Sat Beeper

Bestways Homepage

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 2950
Date:

I have a Dish Tailgator.....old style with remotes so .....run outside put it down ...handle north....go inside set sattalite....done.....and Fine adjustments can be done from inside!!

__________________

 1998 ...Harney Renegade DP  class A

rers1@mail.com

 

My Service dog and life partner " Nikki"......Klee Kia Miniature Husky....(she Runs the ship!!)

We are not lost in the Woods.....Just Extreme boondocking!!!!!!



RV-Dreams Family Member

Status: Offline
Posts: 434
Date:

Terry and Jo wrote:

Rick,

 

Bestway Sat Beeper

 

Terry


Terry>  Although it had a headset instead of the ear bud the Sat Beeper is what I had that worked exceptionally well.  I assumed that they were no longer being made.  Thank you, thank you. You are now in my will!!!  

Lucky>  It would be nice, but I'm way too cheap to buy that.

 



__________________

When it comes to the hereafter, I want to be in the no smoking section. 



RV-Dreams Family Member

Status: Offline
Posts: 5398
Date:

Rick,

You are quite welcome.  It is always a pleasure to be able to exercise my "Google-fu" to find a product or service that helps people out.  I'd say that I've not broken out in a sweat doing all this, but we do have one air conditioner that isn't working at the moment.  Fortunately, the temps are only in the low 90's outside.

As for being in your will, don't bother, unless it involves firearms and ammunition.  Then I'll accept it.

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 434
Date:

Terry> I order two of the sat beepers today in case I get another senior moment and lose another one.

No problem on most of the guns and ammo, but you can't have the 8mm German Mouser that my Dad took off a battle field prisoner nor the late 1700's cap and ball Navy revolver my grandfather gave me.

Sorry to hear about your a.c. issue. I will offer a temp fix suggestion.  This came from a similar problem I had a couple years ago. I bought a 5000 BTU, $100 window unit from Wally World and put it in a slide out window.  It was red neck engineering but worked like a charm for the two months that we were in one location.  I sold it after we got home for a bit more than half what I paid for it. 

Rich

 

 

 



__________________

When it comes to the hereafter, I want to be in the no smoking section. 



RV-Dreams Family Member

Status: Offline
Posts: 5398
Date:

Rick,

I wouldn't give up those firearms either.  While I don't have any hand-me-downs from family, I do have an old cap and ball muzzle loader in a "carbine-style" that I picked up in Afghanistan back in the '60's.  I bought the rifle, some tools, a powder scale, a powder horn, a shield and a saber for about $10 U.S. money.  Lots of the guys were taking three day passes and going to Kabul to get stuff.

As for the A/C, we decided to go to Home Depot and buy a portable air conditioner.  It cost around $300, but I don't have to find a way to install it in a window or jerry-rig a vent system for it.  It comes with a vent system.  When we were out to get it, our pickup's thermometer said it was 97 outside.  The new A/C has cooled us down to about 86 degrees in the living/kitchen/dining room area.  Alicia and Slade with Rolling Retreats in Elk City will be through tomorrow or Monday and Slade will check out the roof mounted Dometic then.

Who knows, we may keep this portable A/C, at least until we finally retire here and maybe travel to where we don't even need an air conditioner.

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 1337
Date:

Update: That's what I get for Bragging

That sat system worked great for about a week and then died. I was back at home and my DW was stuck at the RV with no QVC, HSN, Reality Shows...etc. A friend tried to revive the setup but couldn't get a signal from the dish. He made sure the setup was plumb, correct azimuth and elevation but no signal.

I eneded up having to make the trip down to San Diego to try and fix the sat plus the bottom hinge on the door for the fridge broke off. I tried for a couple of hours but couldn't get a signal. I was able to fix the door.

I went back home and got the sat dish and receiver from the house (known working setup) and took it back down to San Diego. Set it up and no signal.....that's weird. I gave up and went to the nearby Dish supplier and bought a Tailgater Antenna. Put it on the roof and within 5 minutes had sat tv again. She sadi "You can fix anything...." yeah right if you throw money at a problem it can be fixed.

So the next day I got angry and worked on the original dish, after about 45 minutes I finally got a signal by just moving it from side to side and then up and down and then side and up then side and down. Eventhough I and my friend both had double and triple checked the dish to make sure we had it plumb and adjusted correctly no signal. I really don't know what worked. It was too dark by the time I got a signal to look at how far off I was from the adjustments.

Anyway, I wished I hadn't bragged about how quick the original setup was....Murphy struck me down.

__________________

"Small House, Big Yard "

"May the FOREST be with you"
Alfa See-Ya 5'er and 2007 Kodiak C4500 Monroe



RV-Dreams Family Member

Status: Offline
Posts: 486
Date:

Heaping difficulty on myself I use a Dish Network 1000.2 antenna.  Of course I want HD everything so I need to pick up 3 satellites at the same time.  Like others have said the secret is to set up the tripod perfectly plumb and be very accurate with the dish settings.  I have to not only have direction (azimuth) but also elevation and skew.  After about 100 setups I have it down to the point where I can get the whole thing operational in about 15 minutes.  If you have the direction nailed and have the elevation accurate it should only be necessary to rotate the dish side to side to peak the signal.  I use a simple signal strength meter for this.  If they ever come out with a Tailgater type of setup that is priced economically AND will pick up more than one satellite at a time I might consider it.



__________________

Ron and Joan
2005 Itasca Sunova 34A
2004 Jeep Grand Cherokee Overland

Fulltiming since 3/28/12

"With change comes opportunity"



RV-Dreams Family Member

Status: Offline
Posts: 1426
Date:

I had mine down pat also except for the last couple months we were on the road I had an exceptionally hard time getting it dialed in.I just wrote it off that I was not not feeling well caused the problem.When I hired someone to install it on our condo here in Arizona he worked with it for a while and finally asked me.Have you dropped this a few times or something? I told him the wind had blown it over a few times.He said you must have been lucky finding a signal because the arm was bent several degrees out of whack.It wasn't visible to the naked eye but when we compared a new one side by side you could see a big difference.So long story short if you are having trouble and have no visible obstructions in the way stop and ask yourself if you have ever dropped it or had the wind blow it over. It was the 1000.2  which made it harder.



-- Edited by Racerguy on Thursday 25th of July 2013 03:01:36 PM

__________________

RVing probably not a reality any more.It was a good time while it lasted.



RV-Dreams Family Member

Status: Offline
Posts: 486
Date:

Racerguy, we had a similar situation with our dish setup.  After trying to set up the dish at 3 different campgrounds with a clear view of the sky I could only get 2 of the 3 satellites that I needed.  I could move the dish to get any 2 of the 3 but not all 3 at the same time.  I finally gave up and called a local technician.  He at first thought either the dish or the arm was bent but that wasn't the case.  What it turned out to be was that one of the receiver horns (LNB) wasn't working so I was only receiving a signal from the other two. Looking closely I saw some red paint scrapes on the side of the LNB.  Since we have nothing red anywhere on our RV I finally figured that it was probably someone mowing the lawn somewhere that had whacked the antenna.  It cost about $100 to replace that LNB so now that I know how fragile they are I disassemble the dish from the arm and "Ellen B." rides comfy and protected on the bed when we move!



__________________

Ron and Joan
2005 Itasca Sunova 34A
2004 Jeep Grand Cherokee Overland

Fulltiming since 3/28/12

"With change comes opportunity"



RV-Dreams Family Member

Status: Offline
Posts: 25
Date:

RVRon wrote:

Racerguy, we had a similar situation with our dish setup.  After trying to set up the dish at 3 different campgrounds with a clear view of the sky I could only get 2 of the 3 satellites that I needed.  I could move the dish to get any 2 of the 3 but not all 3 at the same time.  I finally gave up and called a local technician.  He at first thought either the dish or the arm was bent but that wasn't the case.  What it turned out to be was that one of the receiver horns (LNB) wasn't working so I was only receiving a signal from the other two. Looking closely I saw some red paint scrapes on the side of the LNB.  Since we have nothing red anywhere on our RV I finally figured that it was probably someone mowing the lawn somewhere that had whacked the antenna.  It cost about $100 to replace that LNB so now that I know how fragile they are I disassemble the dish from the arm and "Ellen B." rides comfy and protected on the bed when we move!


 That is an expensive LNB. I just got a free Dish 1000.4 with the 3 LNB's. I was ready to buy one for 30.00 for the whole setup from a Dish dealer till this one showed up.



__________________


RV-Dreams Family Member

Status: Offline
Posts: 486
Date:

cpaulsen wrote:
RVRon wrote:

Racerguy, we had a similar situation with our dish setup.  After trying to set up the dish at 3 different campgrounds with a clear view of the sky I could only get 2 of the 3 satellites that I needed.  I could move the dish to get any 2 of the 3 but not all 3 at the same time.  I finally gave up and called a local technician.  He at first thought either the dish or the arm was bent but that wasn't the case.  What it turned out to be was that one of the receiver horns (LNB) wasn't working so I was only receiving a signal from the other two. Looking closely I saw some red paint scrapes on the side of the LNB.  Since we have nothing red anywhere on our RV I finally figured that it was probably someone mowing the lawn somewhere that had whacked the antenna.  It cost about $100 to replace that LNB so now that I know how fragile they are I disassemble the dish from the arm and "Ellen B." rides comfy and protected on the bed when we move!


 That is an expensive LNB. I just got a free Dish 1000.4 with the 3 LNB's. I was ready to buy one for 30.00 for the whole setup from a Dish dealer till this one showed up.


 Oh yeah... I think I paid less than $50 for the entire dish setup, used from a guy on Craigslist.  It's a lot more expensive when you have a technician come to your campsite, diagnose the problem and supply the parts.



__________________

Ron and Joan
2005 Itasca Sunova 34A
2004 Jeep Grand Cherokee Overland

Fulltiming since 3/28/12

"With change comes opportunity"



RV-Dreams Family Member

Status: Offline
Posts: 50
Date:

I solved my dish setup problem and went out and had a traveler installed on top the 5th wheel. Just push the button


__________________

Steve & Kathy Ripley

2015 Ford F350 Dually

2018 Heartland 3760

4634f403-5cd4-498d-939b-f84587b07620.jpg

 

 

 

 

 

 

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us