Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
Haven't known anyone who had luck with trying to reglue decals. Most just trim the edges off or remove the decals completely. I suppose you could see if they are available from the mfg.
Jim
-- Edited by Jim01 on Wednesday 8th of May 2013 05:24:21 AM
__________________
Jim and Linda Full-timers from 2001 to 2013 http://parttimewithjandl.blogspot.com/ 2006 Dodge 2500 Diesel pulling a Heartland 26LRSS TT May your days be warm, and your skies be blue. May your roads be smooth, and your views ever-new.
Haven't noticed a tread for this topic... On our Montana on the p/s the decals near the 5th wheel section are peeling. When we bought it we had them take the decal off the front section it was peeled so bad and they buffed it out. Really looks better without it. On the side though they trimmed the edges back and it looked good, now that it is sitting in the sun the edges are peeling back again and decals are a little brittle. Any thoughts on using something to reglue the edges back down and hold?
__________________
06 GMC 3500 SLT Duramax, Allison.
09 Montana 3665re
Safe travels to all, Take each day as a gift for that is truly what it is.
We have peeling decals on our RV and what we did was run a plastic scraper over the edges and it took anything curled up right off. The decals looked 100% better. The scraper is about 8 inches wide and came from Home Depot in the muding and taping drywall department.
