Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
I've just purchased a used DP that has a Weldex 7063-M rear view system. Driving the unit home I discovered that the rear camera image is reversed; items appearing on the left side are actually on the right side and vice-versa. Obviously this can be quite discerting when you expect something to pass you on one side and then it sneaks up on you on the opposite side.
This appears to be Mirror Image function of the system. The owners manual states the mirror image function is enabled/disabled using the remote. Unfortunately the remote didn't come with the unit. Does anyone know how to acees the Mirror Image functionality without the remote?
I sure hope someone can help me before I zig when I should zag!
__________________
Joan & Steve '14 Entegra Anthem '08 HD Streetglide, 2014 Jeep Rubicon Unlimited 4x4
Well, the 'DUH!' factor just stepped in! All I had to do was use the Menu selections on the monitor. Thanks to Weldex Technical Support for pointing that out. Now things that appear on the left are on the left (and vice versa).
See ya'
__________________
Joan & Steve '14 Entegra Anthem '08 HD Streetglide, 2014 Jeep Rubicon Unlimited 4x4
All I had to do was use the Menu selections on the monitor. Thanks to Weldex Technical Support for pointing that out. Now things that appear on the left are on the left (and vice versa). 
