Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
I have a 1 year old travel trailer that already has some frame rust. In reccomendations for the best way to treat that? It seems the worst on the bottom of the frame's I-beams where the plastic sheeting (belly enclosure) is screwed to the frame members.
RV manufacturers seem to have something against putting much paint on their frames.I have seen high dollar units with surface rust on them. When we bought ours I just went to Walmart and bought the cheapest black paint I could find and spent a day covering as much as I could.Probably over kill but made me feel better.
__________________
RVing probably not a reality any more.It was a good time while it lasted.
I try to inspect the bottom of my trailer periodicly and brush off rust and repaint the surfaces. It is much easier to keep it maintained than to let it continue to rust and then try to remove it once it has started eating away at the steel.
__________________
Allan, Jeanne and Katie the cat Full-timers from Alabama "07 -40' Phaeton & '08 Jeep Liberty
I noticed some surface rust after about a year or so, but never got around to doing anything about it. Just lazy I guess. I have to say that it hasn't seemed to have become any worse after 4 years of being in the elements 24/7.
I had a 10 year old car that the underside was rusty, but still OK. I think it's more appearance than a structural problem.
If you're concerned about the rust, how about going to your friendly hardware store and buying some of that black rust-stop paint that they sell. You can get either the spray on or brush on type. Follow the instructions on the can and it should help stop it.
If it was me, I don't think I'd worry about some surface rust.
Jim
__________________
Jim and Linda Full-timers from 2001 to 2013 http://parttimewithjandl.blogspot.com/ 2006 Dodge 2500 Diesel pulling a Heartland 26LRSS TT May your days be warm, and your skies be blue. May your roads be smooth, and your views ever-new.
Fred and Jim make excellent points about surface rust, look at the under carriage on your tow vehicle some time.I painted mine more for looks than any thing else.
__________________
RVing probably not a reality any more.It was a good time while it lasted.
The best solution for surface and deeper rust is to apply a rust converter.
Here's an example http://www.gemplers.com/tech/rust-stories.htm
It's easy to use, just a quick wire brush to remove loose rust, apply the converter, let it dry 24 hours and then apply a rust preventative paint. (or primer and then paint for even better results)
It works great and lasts a lot longer than just using just rust preventative paint.
I've used rust converters on body parts, bicycles, frames, engines and metal trim around the house.
__________________
Larry "Small House, Big Yard " 7 years to go to FT Alfa See-Ya 5'er and 2007 Kodiak C4500 Monroe Pickup
I have to say that it hasn't seemed to have become any worse after 4 years of being in the elements 24/7.
