Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: PSI for Normal Washing?
LDM


RV-Dreams Community Member

Status: Offline
Posts: 19
Date:
PSI for Normal Washing?


I am looking for some help regarding PSI for a power washer for home use/washing our RV.
I want to make sure I will not harm decals/exter...etc. by using PSI that is to strong...any one who could help with suggestions...Thanks.


__________________
LDM


RV-Dreams Family Member

Status: Offline
Posts: 518
Date:

Click to see a prior RV-Dreams thread


A highlight is...

One way to wash a rig (mine has full paint and Diamond Shield)...
BTW - Home use - depending on what you want to do - will likely present VERY DIFFERENT pressure washer recommendations.
 
 1578970_med.gifPLUS Soft pad on a stick PLUS Only 15 gallons of water

I bought a $60 factory remanufactured, extremely small (like toaster sized) pressure washer at Big Lots ($90 new/regular at Northern Tool) and using a micro fiber pad on a stick (WalMart Rubbermaid for $8) can wash a 45 footer using the inverter to power the pressure washer and only 15 gallons of water from the RV water tank and viola, one sparkling clean 45foot rig....

The idea of the pressure washer is to minimize water use during rinse and these baby models are so low pressure they can't hurt anything - Not even the Diamond Shield. They are easy to store and use little electricity meaning they can be inverter powered.

I quickly wet an area (like a third of a side) using the pressure washer, dip the pad (a non full paint rig can use a brush instead of the micro fiber pad) in a bucket of soapy water, scrub the area, and then rinse with the pressure washer. Usually only 15 gallons total and about 30 minutes time for a 45 footer.

Nothing like doing a wash at a pull out on a high mountain pass overlooking a beautiful scene. Takes the drudgery out of washing your rig!

If you use a commercial wash, I'd suggest ONLY Blue Beacon as they have an RV specific process (which also includes NO acid based soap) and know what Diamond Shield is and to back off the pressure wands when cleaning those areas. They really are not all that expensive for what you get, about $50 for a 45footer.

But, like I said, I do mine using the above tools on beautiful pull outs and enjoy the view while washing....



-- Edited by RVDude at 18:51, 2008-12-25

__________________
www.RVDude.com
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us