Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Repairing crack in corian


RV-Dreams Family Member

Status: Offline
Posts: 146
Date:
Repairing crack in corian


Because of a stupid mistake I'm not even going to discuss,  I now have a crack in the corian cover over the stove top.  Is there some way to repair it?
Thank you,  Brenda

__________________
We may not have it all together, but together we have it all! D, B & H


RV-Dreams Family Member

Status: Offline
Posts: 518
Date:

Cracked as in broken in two? That might be a problem. In either case take it to a local Corian installer/fabricator (yellow pages or ask for a name at a Lowes/Home Depot). They have a special Corian epoxy (in the exact color to boot) and if broke in two will suggest a way to repair with reinforcements. I'll bet they won't charge much at all (or nothing) to apply some adhesive for you. Good luck.

__________________
www.RVDude.com


RV-Dreams Family Member

Status: Offline
Posts: 146
Date:

It really is just a surface crack about  2" long but it is starting to discolor so very apparent.  Hopefully I can just get some adhesive and fix it myself.
Thank you,  Brenda

__________________
We may not have it all together, but together we have it all! D, B & H


RV-Dreams Family Member

Status: Offline
Posts: 1043
Date:

Please share the mistake with us all so we don't make it! That will make you the hero.

Joe and Sherri

__________________

 

Joe Sherri and Kris living in a Open Range Lite 308BHS. 2500 Dodge Ram Diesel  http://speedysgreatadventure.blogspot.com/



RV-Dreams Family Member

Status: Offline
Posts: 518
Date:

The crack repair process is quite straightforward. Clean out the crack (scrape out the discoloration) and have it filled with the Corian epoxy. They should then cover the repair by slapping aluminum foil in it in order to maintain the curing heat. After it sets 24hrs carefully putty knife off the excess and then start sanding with wet/dry starting around 320 grit and work up to a polish at 1000 grit or so.

__________________
www.RVDude.com


RV-Dreams Community Member

Status: Offline
Posts: 1
Date:

What is the best way to polish corian? Ours seems so dull and not sure what to use. thanks and appreciate any suggestions.

__________________


RV-Dreams Family Member

Status: Offline
Posts: 518
Date:

Depending on the extent of the scratching, start wet sanding at 400/600 move up to 800 and finally 1000. Finish (if necessary) with white polishing compound on a slower speed polishing wheel. Matte finished Corian won't need any more than 800 while a high gloss (unless it is a gloss coating) might need the white polish step. Stop when the lustre all matches.

__________________
www.RVDude.com
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us