Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
I just wanted to share something about recently replacing my shocks with gas filled Bilstein shocks just in case anyone wants to refer to any information about my situation. I do not work for them or represent them in any way.
I have a 2002 Pace Arrow 37A Ford chassis coach. There was quite a bit of side roll and road wandering when I first too the coach on the road. I considered a Steering assist or a Sway Bar to correct the problems. But a friend recommended that I replaced my shocks with Bilstien B6 Gas shocks. http://www.bilstein.de/en-uk/products/high-performance-shock-absorbers/bilstein-b6/
I took his advice and the results have been nothing but fantastic. No roll, no wandering and it was significantly cheaper than a sway bar or steering assist mechanism. ($625 for 4 with install) I figured that the shocks needed to be replaced anyway, so this was the best way to go.
So I figured that I would post this in case anyone wanted to investigate improving the ride performance of their coach. Although certain chassis types are different, replacing your shocks with these are a good bet anyway to improve performance.
Cheers
Big Mike
__________________
Mike and Barb
2002 Fleetwood Pace Arrow 37C with a 2008 Saturn Vue Taod
Koni is also a good brand for shocks, in some cases they will be better choices than Bilstein. Both are improvements over what comes on many motorhomes. On our old gas motorhome, on a Workhorse W22 chassis, we ended up replacing the lousy Monroe shocks with Bilstein in front and Koni in the back, since those are what fit. We have OEM Bilsteins on our diesel, but they are getting old and we plan on replacing them with Koni shocks in fall.
__________________
Bill Joyce, 40' 2004 Dutch Star DP towing an AWD 2020 Ford Escape Hybrid Journal at http://www.sacnoth.com Full-timing since July 2003