Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Roof Sealant


RV-Dreams Family Member

Status: Offline
Posts: 151
Date:
Roof Sealant


 

Hi,

I'm getting closer to escaping Toronto at the end of October!


I went up on the roof of my motorhome yesterday, and found that it's made out of some kind of sheet metal.

The sheet metal looks like 'new'!

There's a seam line that has gunky looking old dried up white sealant on it.

The sealant is all flaking everywhere ...including all around the roof vents and pipe vents too!

I guess I should scrape off all the old flaking sealant the best I can, and put new sealant on it?

I'm hoping that something like this will seal it all up again?

0641190_1?$sri-image$

I can get it at Canadian Tire for $39.99

Here's what it says about it...

  • Gardner STA-KOOL Elastomeric Roof Coating provides weather protection, heat reflection and sound deadening for RVs, metal roofs, shingled roofs, built-up roofs and tile roofs

  • Beautifies, protects and seals

  • Waterproof

  • Good low temperature flexibility

  • Colour: white

  • Available in 3.4 L

.

.

...and here's what I'm thinking to use on the seams that go down along the side of my motorhome?

GE Silicone II (White) Premium Waterproof

0670844_1?$sri-image$

I can get it at Canadian Tire for $5.99

Here's what it says about it...

  • Mildew resistant
  • Outstanding adhesion
  • Permanently flexible
  • Low odour


__________________


RV-Dreams Family Member

Status: Offline
Posts: 1395
Date:

Stay Kool; Like Kool Seal in the US for on the Roof is great and will last about 5-7 yrs. On the seems I would use EPDM Rubber; remains very flexible is waterproof and will stretch with the movement of the seams; in the tube for the caulking gun, can get on line through Amazon or Camping World.

__________________

Life is too short. Live it Now!

Currently at Shady Acres RV Park   Lebanon; Tennessee

http://1Irishrover.blogspot.com

 



RV-Dreams Family Member

Status: Offline
Posts: 151
Date:

PIEERE wrote:

Stay Kool; Like Kool Seal in the US for on the Roof is great and will last about 5-7 yrs. On the seems I would use EPDM Rubber; remains very flexible is waterproof and will stretch with the movement of the seams; in the tube for the caulking gun, can get on line through Amazon or Camping World.


 Thanks for replying, Pieere!

Won't the Kool Seal make the roof seam waterproof?

I'm only looking for something simple to seal off the metal roof seams.

I got the Kool Seal now ...but I haven't opened up the can yet.

I'm hoping it's like the consistency of 'tar' so I can just slop it on over the metal seam after I get the metal seam area all clean and smoothed down of the old gunk.

That EPDM rubber is too difficult for me.

The metal sheeting can just remain as it is. - I only want to slop waterproof paste over the roof seams.

...and slop it around the roof vents and roof pipe caps too.

Here is what I am expecting the Kool Seal consistency to be...

Caulking-Roof-vent-sealant-2.jpg



-- Edited by Millie on Saturday 15th of August 2015 12:27:51 PM

__________________


RV-Dreams Family Member

Status: Offline
Posts: 1509
Date:

DO NOT USE ANY SILICONE................EVER.

For all seams and flashings;
Use DICOR self-levelling compound for flat surfaces. Use DICOR non-sagging compound for anything more vertical.



-- Edited by TRAILERKING on Saturday 15th of August 2015 05:50:47 PM

__________________

My Dreams...............Her Nightmares.

 



RV-Dreams Family Member

Status: Offline
Posts: 151
Date:

TRAILERKING wrote:

DO NOT USE ANY SILICONE................EVER.

For all seams and flashings;
Use DICOR self-levelling compound for flat surfaces. Use DICOR non-sagging compound for anything more vertical.



-- Edited by TRAILERKING on Saturday 15th of August 2015 05:50:47 PM


 

(Researched) That sounds like really good stuff, Trailerking

But I don't want to just lay down a 'bead' from a caulking gun along the length of the roof seam, and roof vents and roof caps.

I want to lay a heavy 6” wide strip of waterproofing compound along the roof seam, and roof vents and roof caps.

 

Is the Sta-Kool consistency as thick as tar?

(I don't want to open the pail of it to see if the consistency is thick or thin like paint ...in case they won't refund if it's been opened, if I find out the consistency is thin like paint.)



-- Edited by Millie on Saturday 15th of August 2015 08:57:24 PM



-- Edited by Millie on Saturday 15th of August 2015 08:58:37 PM



-- Edited by Millie on Saturday 15th of August 2015 09:00:06 PM

__________________


RV-Dreams Family Member

Status: Offline
Posts: 1509
Date:

If you are wanting to do a 6" wide strip along a seam............Another option is Eternabond. You need to get it down right the first time because you will not lift it off. It sticks PERMANENTLY.

http://www.eternabond.com/default.asp



-- Edited by TRAILERKING on Saturday 15th of August 2015 10:03:58 PM

__________________

My Dreams...............Her Nightmares.

 



RV-Dreams Family Member

Status: Offline
Posts: 156
Date:

Millie,  If you go to the manufacturer's website <http://www.gardner-gibson.com/Media/project-how-to's/how-to-apply-elastomeric-roof-coatings.pdf?sfvrsn=2> there are some how-to instructions on the application of Sta-Kool.  I don't think that it looks as thick as you were hoping for.  Check it out and see what you think.

I think that Trailerking's suggestion of Eternabond is a good one.  I wouldn't go quite so far as to say it's permanent but it will last for quite a while.  I'd go ahead with your plan to remove as much of the old loose sealant as you can, then follow the instructions for the eternabond (i.e. cleaning the surface before you apply, etc.).  Eternabond comes in several different widths so you can pick what you think is appropriate.

Good luck with your project!  Maybe post pictures when your done :)

 



__________________

Judy LeMosy

2007 New Horizons Summit 38' / 2001 Volvo 610 w/ Smart Car on bed

 



RV-Dreams Family Member

Status: Offline
Posts: 156
Date:

Millie - Just another thought with regard to the Dicor self leveling sealant.  You said that you didn't want "lay down a bead from a caulking gun" and I understand what you mean but with the self-leveling dicor you can cut the tip of the tube very wide and then place thick beads next to each other and they will self-level into one wide strip.  It will end up looking very much like the picture you attached to your post above.  Hope this helps.



__________________

Judy LeMosy

2007 New Horizons Summit 38' / 2001 Volvo 610 w/ Smart Car on bed

 



RV-Dreams Family Member

Status: Offline
Posts: 1509
Date:

This is also a decent product. Lots of work to do it properly.
http://www.rv-armor....CFQYoaQodspoOsQ

That's other than doing a total strip and re-roof.



-- Edited by TRAILERKING on Sunday 16th of August 2015 09:50:25 PM

__________________

My Dreams...............Her Nightmares.

 



RV-Dreams Community Member

Status: Offline
Posts: 2
Date:

I think in this case you need Flexible RV Roof Coating than usual sealant. Sometimes it's more reliable. And also it can waterproof you roof and it's really important.



-- Edited by FrankByMonster on Thursday 18th of May 2017 12:48:34 AM

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us