Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
can you clean and ajust the spark igniter for a 3 burner stove when you turn the knob they spark but wont light the burners but the burners light fine with a lighter.
Pilot ports are blocked from spilliage or some type of debri........onthe side od your burner there is 3 little holes(next to the igniter) pull the burner and clean these holes our with a common pin or small needle.....be careful not to enlarge them
this should cure the problem....
hope it works , if not let me know and we can go from there
__________________
1998 ...Harney Renegade DP class A
rers1@mail.com
My Service dog and life partner " Nikki"......Klee Kia Miniature Husky....(she Runs the ship!!)
We are not lost in the Woods.....Just Extreme boondocking!!!!!!
took the top off the stove around burners to clean ports and found that there is 3 wires on the igniter one goes to each burner put that one wire back on and all burners light fine now thanks for the help.
