Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
My parents had their fuel pump changed on their class c. It has a 55 gallon tank with a gm engine. the gen is a 4000 watt onan. The pump was changed on the road not by a local shop. Since that time the gen won't run. I disconnected the fuel line at the gen , there is no fuel. I traced the line back to the tank. It goes to a tee about 4 feet from the tank. On the tank there are 3 lines. 2 go to the fuel pump. 1 goes to a tee and enters the tank at 2 spots. I think the last is a vent, but an not sure. The line for the gen goes to one side of the fuel pump. the other line on the fuel pump goes to the fuel filter for the main engine. I am not sure where the line leaving the tee in the gen line goes. I lose it going to the engine. Does anyone have any suggestions on where I need to start.
