Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: gooseneck hitch adapter


RV-Dreams Family Member

Status: Offline
Posts: 237
Date:
gooseneck hitch adapter


Has anyone ever pulled a fifth wheel with a goose neck instead of a regular 5th wheel hitch?

If so, how did it do?  We are buying a 2006 which has the adapter on it....we will get a regular 5th wheel hitch put on a new truck, but for getting the camper to our house....do you think we can use a gooseneck?  We have about 7 miles to pull it.

Melanie

__________________
Melanie White

2006 Crossroads Paradise Pointe 33' 5th wheel
2002 F250  Crew Cab Lariat 7.3
www.melspotluck.blogspot.com


RV-Dreams Family Member

Status: Offline
Posts: 642
Date:

Lots of 5th wheels have a frame built by Lippert. Most often they do not warrant the frame if it has a goosneck adaptor. Check into the manufacturer to se if the gooseneck negates any warranty issues. I understand it is not a new rig, but in some instances, an incorrect towing apparatus causes undue frame component stress and leads to cracking of welds and metal fatigue.

__________________
Ken and Fran 2006 Sunnybrook F250 SD CC PSD


RV-Dreams Family Member

Status: Offline
Posts: 1426
Date:

I second what 53merc said. The seven miles home would not hurt it though so get it home then get rid of the adapter.

__________________

RVing probably not a reality any more.It was a good time while it lasted.



RV-Dreams Family Member

Status: Offline
Posts: 119
Date:

If the original owner pulled it with the gooseneck adapter I am sure it would be safe to pull it to your home.

__________________
http://powersdandm.blogspot.com/
FD5


RV-Dreams Family Member

Status: Offline
Posts: 123
Date:

I would call the manufacture of the trailer (not a dealer for the trailer) and ask about the gooseneck adapter. The torque applied to the frame from a gooseneck is much more on a 5th wheel hitch (2 different designs) for the frame. A gooseneck adapter can cause unseen frame damage that may show up years later. Before I would purchase the trailer I would call the manufacturer.

Just my 2 cents.

__________________

John & Bridget
Madison, MS
2012 Ford F550
2011 DRV Mobile Suite 36TKSB3
2002 Suzuki Vitara JLX
http://www.travelsofjohnandbridget.blogspot.com/


Mississippi Independent
Amsoil Dealer



RV-Dreams Family Member

Status: Offline
Posts: 1426
Date:

John makes a good point I didn't think of.

__________________

RVing probably not a reality any more.It was a good time while it lasted.



RV-Dreams Family Member

Status: Offline
Posts: 5399
Date:

Melanie,

With this one, I'm surprised that you didn't get differing opinions.  On some other RV forums, that question has usually caused some very spirited discussions, with strong adherents in both for and against camps.

While the normal pulling of a fifth wheel camper with the normal fifth wheel hitch causes a "direct pull" on the fifth wheel pin, the use of the adapter doesn't have so much a direct pull but a "leveraged" pull.  So, the force on the fifth wheel pin is enhanced in an almost upward pull, tending to want to "bend" the fifth wheel pin itself.  I don't know if that is a good description, so think of the force on a pipe wrench handle by the use of a piece of pipe as an extension of the handle.  On occasion, too much use of additional leverage leads to failure.

If your camper is NOT loaded to max and you are going just a short distance, I would guess that it would be okay as long as there are no long uphill pulls or dips or whatever that could put a sudden "jerk" on the pin.  However, as soon as possible, I suggest getting the fifth wheel.  If you were to get the fifth wheel hitch first, your dealer could make sure of any adjustments necessary to the hitch to make your fifth wheel camper more level when towing.

Terry


__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 237
Date:

Thanks...we are definitely going to get a 'regular' 5th wheel hitch installed when we get a truck.  The trailer had a gooseneck adapter....we will have it taken off.

We may need it only for moving from our driveway to the spot in the yard where my husband is pouring a pad to park it on.  son in law has a truck with a gooseneck so we'll use his truck only for that movement.

the RV place will be bringing the trailer to us, I think....or we'll pick it up with son in law's truck.  Only 7 miles and it's pretty flat!  We're in SW Louisiana!

We did check for any seeable fractures, etc. if the person who owned it traveled with the gooseneck.  Nothing that we can see.

Melanie

__________________
Melanie White

2006 Crossroads Paradise Pointe 33' 5th wheel
2002 F250  Crew Cab Lariat 7.3
www.melspotluck.blogspot.com
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us