Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Trying to get 50 amps


RV-Dreams Family Member

Status: Offline
Posts: 32
Date:
Trying to get 50 amps


Hi, everyone.
We are at my brother's in NJ.  He has a 50 amp circuit in his workshop with a range (two straight and one half-round holed) outlet.  Our DutchStar would like 50 amps.  How can we hook up to his outlet?  We tried refiguring a dog-bone 30/50 amp adapter with a new male range plug.  But we still only get 15 amps.  We talked to an electrician and he said we needed two neutral points (thus the four prongs) but there are only three wires in the cable!  Help, anyone?

__________________

Think of all the beauty still left around you and be happy

 Used to be:

2003 DutchStar towing our Jeep Sahara

Now: 2017 GD Solitude 330GK-R towed by 2016 F350 SuperDuty 6.7L DRW



RV-Dreams Family Member

Status: Offline
Posts: 642
Date:

Since I am not an electrician, take anything with a grain or two of salt. I read on either this or another travel forum that a welding/range/dryer plug could not be configured to provide 50 amps to the trailer. Something about not enough commons or some such esoteric bit of information.

__________________
Ken and Fran 2006 Sunnybrook F250 SD CC PSD


RV-Dreams Family Member

Status: Offline
Posts: 292
Date:


Hope this helpssmile.gif

Installing and understanding the 30 and 50-amp RV Electric Service

http://www.myrv.us/electric/Pg/50amp_Service.htm



__________________

Mark & Nancy
2004 F-250 XLT 6.0 Diesel
2001 Sunnybrook 2708 TT



RV-Dreams Family Member

Status: Offline
Posts: 1337
Date:

I have seen an adaptor device that takes power from two 15 amp plugs and converts to 30 amps. It's similar to a y adaptor but has a box with a 30amp RV plug on it. I did a quick search on the internet and found a two 30 amp to 50 amp adaptor but couldn't find the dual 15 amp to 30.

Your MH should be able to run off of a 30AMP outlet. Usually the only reason you need 50 amps is if you plan on using two A/Cs at the same time or A/C and washer dryer at the sametime.

In other words, 50 amps will let you use everything in the MH at the sametime. With 30 amp service you just have to make sure you only use one high draw electrical appliance at a time. All the little stuff like TV, sat box, dvd player will work along with one or even two high draw like one A/C and the washer. Or the washer and dryer but no A/C.

__________________

"Small House, Big Yard "

"May the FOREST be with you"
Alfa See-Ya 5'er and 2007 Kodiak C4500 Monroe



RV-Dreams Family Member

Status: Offline
Posts: 1144
Date:

Again, I must caution you to be very careful that any plug you hook your RV to is wired for an RV. 

If not wired correctly and you plug in your RV it may fry everything electronic inside of your unit!! cry 

Please be very careful and make sure it's right before plugging in!!

Jim

__________________

Jim and Linda
Full-timers from 2001 to 2013
http://parttimewithjandl.blogspot.com/ 
2006 Dodge 2500 Diesel pulling a Heartland 26LRSS TT
May your days be warm, and your skies be blue.
May your roads be smooth, and your views ever-new.



RV-Dreams Family Member

Status: Offline
Posts: 2074
Date:

May I say this with respect for your safety and your rig’s as well:

The plug you indicate is not useable.  It is missing the neutral or ground wire; probably the neutral.  (Takes 2 hot wires -  1- neutral -  1- ground for a 50 amp RV plug.)

You cannot use this plug for "50 amps" as is.

This link provided and copied here again is excellent and correct. 

http://www.myrv.us/electric/Pg/50amp_Service.htm

May I suggest you print this out and call a qualified electrician to do an install of the correct electrical outlet?  This cannot be “jury rigged” and work ---  or worse.  Don’t try to use “adapters” to make it 50 amps for an RV.  You can’t.  It is missing wires.

What you are asking about is a common question and requires the same friendly, but firm response: call someone who understands this and have them do the work of adding the proper wiring.  If you don’t know what you are doing you will have a problem and it could be very expensive.

Safe travels

Bill



-- Edited by Bill and Linda on Saturday 15th of May 2010 08:50:18 AM

__________________

Bill & Linda



RV-Dreams Family Member

Status: Offline
Posts: 32
Date:

You guys rock. Gary and I thank you so much. We will call an electrician to get a proper outlet installed and then we can get more than the 15 amps we're running right now. We have a surge protector, and we trust it - to an extent. We will be v-e-r-y careful. Thanks again!

__________________

Think of all the beauty still left around you and be happy

 Used to be:

2003 DutchStar towing our Jeep Sahara

Now: 2017 GD Solitude 330GK-R towed by 2016 F350 SuperDuty 6.7L DRW

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us