This may have been discussed, but the search feature is down. So, I'll ask just in case it hasn't been a former topic.
We are in the process of preparing for a garage sale to get rid of excess stuff. One of the items is a large rolling tool chest. I need to sell it and a bunch of tools. As a replacement, I was thinking of a "tool chest" that is portable with a hinged lid and a few drawers. (Or maybe not...thus the question.)
Such a chest would have all our tools in one place. Would such amount of weight in a specified "footprint" be too heavy in the basement area? Or what if one used three or four plastic (thinking lightweight here) boxes and divided tools according to their respective types? That way, one could spread the weight out over different areas of the basement. That idea may also allow one to better fit the boxes in smaller nooks or crannies.
Or, would it be better to have a tool box to fit in the bed of the pickup? That idea seems to come with the relevant problem of how easy would access be if one is hooked up to the fifth wheel.
Other than those options, does any have any other ideas one could consider?
Thanks for any replies.
Terry
Speedhitch said
09:40 PM May 10, 2009
Terry....I would have to assume by your question you would know what to do with all these tools?? I keep a very small arsenal of tools because I am limited on what they would be used for and how to use them....I do keep plenty of bandaids and gauze with antiseptic for when I do use these tools and get hurt. My first aide kit takes up very little room and the weight does not take away from my MPG.
Racerguy said
10:45 PM May 10, 2009
I am also getting ready to head out and had the same problem. I am very mechanical so plan on repairing all I possibly can. Since weight and space are at a premium here is what I did although I may find it to be overkill or I may not. I will adjust as need be. Went to Sears and bought a small plastic Craftsman tool chest with 3 metal drawers. These are the tools I put in it. 1set combo open end and box end wrenches 5/16 thru 1" 1 set metric wrenches 10mm thru 14 mm.Small cresent wrench,pliers standard and needle nose,vice grips, various screw drivers,1/4" drive socket set,3/8" drive socket set,multi meter,1/2" torque wrench for lug nuts.The whole toolbox with tools weighs about 40 lbs.This will be in front storage area. I will also take my 18volt drill but will put it under seat in the pickup.Hope that helps and maybe others will chime in and help us both out.
NorCal Dan said
03:39 AM May 11, 2009
I got rid of most of my tools. I kept an assortment of tools to handle small jobs, screwdrivers, hammer, pliers and wrenches, socket set, drill, dremel set, volt meter. I bought a plastic tool box that holds everything and is easy to store in the basement. I didn't bring any of my plumbing tools and parts and may regret that someday. But I just didn't think I would need everything, and space is at a premium.
What I miss is all my miscellaneous odds & ends type stuff, ie. nuts & bolts, wire wraps, extra parts type stuff. After many years of owning a home I always seemed to have the items I needed when doing repairs. Now I make regular runs to the hardware store and buy only what I need so there is nothing left over to store.
Sandra said
08:11 AM May 11, 2009
We just use a plastic tub for tools.
thebearII said
08:25 AM May 11, 2009
I use a medium sized ammo can, a tool pouch and a plastic tool box.
I have an assortment of sockets, wrenches, pliers, wire cutters and specialty tools in it to work on the truck and mechanicals of the trailer. I just dump the contents onto a table or in the bed of my truck, use the tools I need and then put everything back in the box when I'm through.
I also carry a tool pouch with a kit of power tools by Black & Decker, it includes cordless drill motor, sabre saw, 6" circular saw, hand vacuum, stud finder and worklight, plus extra battery and charger. This takes care of any home repair type projects and helps with firewood. This stays in the basement storage of the 5'er.
I also have a plastic tool box to carry hammers, more pliers, clamps, hand saws, drill bits, electrical testers & tools, dremmel tool, and other tools and spare parts. This box is a foot tall, 20 inches wide and 10 inches across. It's made by Stanley and has a tray inside plus small parts compartments on the outside. It's very handy. I carry this and the ammo box in a cross the bed tool cabinet in the truck.
So depending on the job to do, I grab the appropriate tool carrier(s).
I find this combination has served well, I've completed major repairs on my old truck while on the road (replace radiator, brakes, U-joints, starter..etc) and on the 5'er I've built shelves, repaired the refrigerator door when it fell off, replaced faucets, traced down and fixed electrical problems....etc. I've been able to do craft projects as well. Just like at our sticks & bricks.
There's been several occasions where I didn't have the correct tool, but have been able to get by using what I have on hand. A couple of times, I've gone into town to buy the correct tool.
-- Edited by thebearII on Monday 11th of May 2009 08:36:07 AM
Fordiesel250 said
02:53 PM Jul 18, 2009
I have a plastic tackle box that I keep my wrenches, sockets and other items that we might need.
dream reachers said
06:43 PM Jul 18, 2009
I volunteer on church building projects so I carry quite a few power and hand tools besides a portable air compressor and 2 portable generators . I bought a aluminum toolbox from Lowes and put it on the back of my truck plus I have tool compartments built on my truck. Weight would be a problem on my trailer but not my truck. I'm glad I decided on a medium duty truck it has been really good choice. I almost bought a 450 and would not have had the weight capacity.
foxriverguy said
07:16 PM Jul 18, 2009
Perhaps I have taken a few too many tools, but after a year or so if I don't use some of them then they will be donated.
I have tired to organize my tools into four smaller tool boxes containing like items. For example -- tools that cut, scrape, saw or file are in one plastic box. I also have one of the Craftsmen chests with 3 metal drawers. I put pebbled rubber sheets at the bottom of each drawer, but first I sprayed the rubber sheet with 3M adhesive and they stay in place and keeps tools from sliding around.
Just like some women cannever have too many shoes, some guys cannever ahve too many tools
rwarner22 said
04:35 AM Jul 19, 2009
We debated on tool boxes. Seems now most go with the canvas/plastic molded bags. We have a couple of those and one that hangs over a 5 gallon bucket. We use a small canvas pouch/bag for the wrenches and another for our spikes (tent pegs for our large mat). Seems to work very well. We also have plastic case(s) that came with our Craftsman ratchet set, another one for a drill with a battery pack, and another for a set of drill bit.
Hope that helps,
Randy and Pam
TrishsTravco said
10:48 AM Jul 20, 2009
foxriverguy wrote:I have tired to organize my tools into four smaller tool boxes containing like items. For example -- tools that cut, scrape, saw or file are in one plastic box. I also have one of the Craftsmen chests with 3 metal drawers.
Just like some women can never have too many shoes, some guys can never ahve too many tools
It's true that you really can't have too many shoes.
But it's necessary to have tools.
I broke what I need down into 6 small metal toolboxes and distributed the weight evenly. I must also carry metric for my bike, but that in a smaller, plastic box.
We are in the process of preparing for a garage sale to get rid of excess stuff. One of the items is a large rolling tool chest. I need to sell it and a bunch of tools. As a replacement, I was thinking of a "tool chest" that is portable with a hinged lid and a few drawers. (Or maybe not...thus the question.)
Such a chest would have all our tools in one place. Would such amount of weight in a specified "footprint" be too heavy in the basement area? Or what if one used three or four plastic (thinking lightweight here) boxes and divided tools according to their respective types? That way, one could spread the weight out over different areas of the basement. That idea may also allow one to better fit the boxes in smaller nooks or crannies.
Or, would it be better to have a tool box to fit in the bed of the pickup? That idea seems to come with the relevant problem of how easy would access be if one is hooked up to the fifth wheel.
Other than those options, does any have any other ideas one could consider?
Thanks for any replies.
Terry
I am also getting ready to head out and had the same problem. I am very mechanical so plan on repairing all I possibly can. Since weight and space are at a premium here is what I did although I may find it to be overkill or I may not. I will adjust as need be. Went to Sears and bought a small plastic Craftsman tool chest with 3 metal drawers. These are the tools I put in it. 1set combo open end and box end wrenches 5/16 thru 1" 1 set metric wrenches 10mm thru 14 mm.Small cresent wrench,pliers standard and needle nose,vice grips, various screw drivers,1/4" drive socket set,3/8" drive socket set,multi meter,1/2" torque wrench for lug nuts.The whole toolbox with tools weighs about 40 lbs.This will be in front storage area. I will also take my 18volt drill but will put it under seat in the pickup.Hope that helps and maybe others will chime in and help us both out.
I have an assortment of sockets, wrenches, pliers, wire cutters and specialty tools in it to work on the truck and mechanicals of the trailer. I just dump the contents onto a table or in the bed of my truck, use the tools I need and then put everything back in the box when I'm through.
I also carry a tool pouch with a kit of power tools by Black & Decker, it includes cordless drill motor, sabre saw, 6" circular saw, hand vacuum, stud finder and worklight, plus extra battery and charger. This takes care of any home repair type projects and helps with firewood. This stays in the basement storage of the 5'er.
I also have a plastic tool box to carry hammers, more pliers, clamps, hand saws, drill bits, electrical testers & tools, dremmel tool, and other tools and spare parts. This box is a foot tall, 20 inches wide and 10 inches across. It's made by Stanley and has a tray inside plus small parts compartments on the outside. It's very handy. I carry this and the ammo box in a cross the bed tool cabinet in the truck.
So depending on the job to do, I grab the appropriate tool carrier(s).
I find this combination has served well, I've completed major repairs on my old truck while on the road (replace radiator, brakes, U-joints, starter..etc) and on the 5'er I've built shelves, repaired the refrigerator door when it fell off, replaced faucets, traced down and fixed electrical problems....etc. I've been able to do craft projects as well. Just like at our sticks & bricks.
There's been several occasions where I didn't have the correct tool, but have been able to get by using what I have on hand. A couple of times, I've gone into town to buy the correct tool.
-- Edited by thebearII on Monday 11th of May 2009 08:36:07 AM
I have tired to organize my tools into four smaller tool boxes containing like items. For example -- tools that cut, scrape, saw or file are in one plastic box. I also have one of the Craftsmen chests with 3 metal drawers. I put pebbled rubber sheets at the bottom of each drawer, but first I sprayed the rubber sheet with 3M adhesive and they stay in place and keeps tools from sliding around.
Just like some women cannever have too many shoes, some guys cannever ahve too many tools
It's true that you really can't have too many shoes.
But it's necessary to have tools.
I broke what I need down into 6 small metal toolboxes and distributed the weight evenly. I must also carry metric for my bike, but that in a smaller, plastic box.