Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: RVSEF weighing schedule


RV-Dreams Family Member

Status: Offline
Posts: 47
Date:
RVSEF weighing schedule


Hi all,

We're planning our first long cross country mid November and plan to end up in Las Vegas by mid December.  I think the RVSEF is holding weighing event in Texas early next year.  Although we weighed everything we put into our 5er and took it to a local scrap yard scale to get a handle on our total weight, I would like to get it weighed properly for my peace of mind.

Soooo,  Can anyone share some insight into their experience with this type of program ?

 

Thanks,

Gary



__________________

2020 Fleetwood / Southwind 36P Motorhome

2019 Jeep Cherokee Limited as toad 

Gary & Linda



Host

Status: Offline
Posts: 1224
Date:

Hi Gary,

We weighed RVs and presented tire & weight safety seminars for RVSEF for three and a half years (until late last year).  It's a great program, and the current weighing teams are teams we recruited.  Highly recommend getting weighed by RVSEF - the one weighing service I absolutely know does it right every time.



__________________


RV-Dreams Family Member

Status: Offline
Posts: 2074
Date:

For those new comers who might be reading along on this important subject:

RVSEF weighs each wheel individually, not just the total axle weight which would be the case at a truck stop "CAT" or similar type scale.  Wheel by wheel weighing, if done properly which the RVSEF does, is the only way to know if you are overloaded and within the design limits of your equipment.

Remember, as an example, with an 8,000lb axle there is actually only 4,000lbs of capacity per side.  So if one wheel has 3,500lbs on it and the other has 4,200lbs on it you are overweight even though there is less than 8,000lb on the axle in total.  This example of over-weight condition is more common than most realize.

Bill



__________________

Bill & Linda



RV-Dreams Family Member

Status: Offline
Posts: 47
Date:

Thanks all for the replies.  Those scrap yard scales can be confusing.  We'll just take it slow until we can get a good weigh.

 

Gary



__________________

2020 Fleetwood / Southwind 36P Motorhome

2019 Jeep Cherokee Limited as toad 

Gary & Linda



RV-Dreams Family Member

Status: Offline
Posts: 806
Date:

Most Cat scales have wide enough aprons that you could get side to side wheel weights.

__________________

MarkS & Jackie
MSgt, USAF, Ret
2004 Volvo 780 530 HP Cummins 13 speed
2014 Trilogy 3650RE
fulltime since Oct 8, 2016



RV-Dreams Family Member

Status: Offline
Posts: 2074
Date:

MarkS wrote:

Most Cat scales have wide enough aprons that you could get side to side wheel weights.


 

Mark:

I agree you can get side to side but only the total of the axles, not each wheel – at least not each wheel accurately.  I’ve tried on CAT scales using that technique. But on relatively light trailers (relatively light compared to a semi-van trailer) the results have not been very accurate when compared to wheel-by-wheel DOT calibrated scales of the same trailer.  Just my experience, FWIW.

Bill



__________________

Bill & Linda



RV-Dreams Family Member

Status: Offline
Posts: 806
Date:

Bill,
You have to make sure the wheel(s) you want to weigh are on independent platforms to get individual weights. As to accuracy, cat scales are the most accurate public scales available. Now days any well maintained scale can be really accurate. For example, if I step on a cat scale platform it will indicate my correct weight. The key to accurate weight is to ensure the vehicle is level. If it is leaning to one side or the other the weight will be off.

__________________

MarkS & Jackie
MSgt, USAF, Ret
2004 Volvo 780 530 HP Cummins 13 speed
2014 Trilogy 3650RE
fulltime since Oct 8, 2016



RV-Dreams Family Member

Status: Offline
Posts: 2074
Date:

MarkS wrote:

Bill,
You have to make sure the wheel(s) you want to weigh are on independent platforms to get individual weights. As to accuracy, cat scales are the most accurate public scales available. Now days any well maintained scale can be really accurate. For example, if I step on a cat scale platform it will indicate my correct weight. The key to accurate weight is to ensure the vehicle is level. If it is leaning to one side or the other the weight will be off.


 

Mark:

I completely agree CAT scales are very accurate. Amazingly so.  What I think we’re both saying is that you have to get the wheels positioned “just right” and sometimes that’s hard to do and not get a bad reading and perhaps false security. Your comment about “level” is but one of the issues. No argument about using CAT scales.  But if you can get the RVSEF people to do it you’ll get a report and a professional interpretation based specifically on your vehicle and tire capacities and it will be from a level rig along with the other important setup procedures.

Bill



__________________

Bill & Linda



RV-Dreams Family Member

Status: Offline
Posts: 806
Date:

A report and an interpretation? You didn't say anything about being able to understand the information! Now that's a horse of a different color!

I sometimes forget that most people don't deal with this everyday. For example, we have a driver who is kind of new. He couldn't get his truck to weigh consistently. He called me one day to help with adjusting his weight. He read axle weights to me and his steer axle was off the charts. I told him that it was impossible to get those weights no matter how the truck was loaded. Then it dawned on me. He was setting his brakes on the scale. He released his brakes and never had a problem again.

__________________

MarkS & Jackie
MSgt, USAF, Ret
2004 Volvo 780 530 HP Cummins 13 speed
2014 Trilogy 3650RE
fulltime since Oct 8, 2016



RV-Dreams Family Member

Status: Offline
Posts: 2074
Date:

MarkS wrote:

A report and an interpretation? You didn't say anything about being able to understand the information! Now that's a horse of a different color!

I sometimes forget that most people don't deal with this everyday. For example, we have a driver who is kind of new. He couldn't get his truck to weigh consistently. He called me one day to help with adjusting his weight. He read axle weights to me and his steer axle was off the charts. I told him that it was impossible to get those weights no matter how the truck was loaded. Then it dawned on me. He was setting his brakes on the scale. He released his brakes and never had a problem again.


Mark:

Oh, that brake thing!  Ya think?  When we first did our trailer weight certification - totally dry rig weight at the factory - the truck weight (solo) was way off. Had to be based on previous wheel by wheel weighings I had done.  I knew it was because the scale “automatics” took the weight as I was stopping and didn’t let the truck “settle” with the brakes released. Took it around for another go and got the correct numbers as the first ones were over 1,000lbs off.  If the truck number was wrong the “legal” cargo carrying capacity (CCC) of the trailer would forever be wrong on the factory sticker as you know.

Indeed, part of the advantage of the RVSEF, and other qualified weighing groups, is to help interpret the numbers and in the case of RVSEF they provide manufacture’s tire charts, for your specific tires, as to recommended inflation.  They also know how to "do it right."

Bill



__________________

Bill & Linda



RV-Dreams Family Member

Status: Offline
Posts: 813
Date:

If the RVSEF weighing schedule doesn't match up…and if you happen to be passing near Escapees Headquarters in Livingston Texas they do wheel by wheel weighing as well at their HQ. You'll have to check the web site for hours as I don't think they're open 7 days a week and you don't have to be a member.

 

Wheel by wheel weighing is good as others have noted.

 



__________________


RV-Dreams Family Member

Status: Offline
Posts: 47
Date:

Learning something every day.  First I'd heard about the settling of the scale before reading it.  Can't say for sure that it was stabilized before the weight was read.  Another reason to have it done professionally.  I really question the validity of the manufactures out the door weight. I know I added 600# for fiberglass roof and eliminated couch, chairs and king mattress at the build and the posted weight just happened to be the same weight as advertised. Hmmmm  That's why I had it weighed when we got it home and the weight was 2800 # less than they told me it was. I questioned it and they told me that they weigh out the door and it should be as stated. Another Hmmmmm I think.

Thanks for the additional info everyone.

 

Gary



__________________

2020 Fleetwood / Southwind 36P Motorhome

2019 Jeep Cherokee Limited as toad 

Gary & Linda



RV-Dreams Family Member

Status: Offline
Posts: 1661
Date:

Gary, just to clarify, are you talking about dry weight? The MFR didn't adjust the GVWR did they? In which case you'd have an extra 2800 lbs of cargo capacity if I understand correctly.

Brian

 



__________________

Brian, Cindi & Josie (our fur baby)
2017 RAM 3500 Laramie 4x4 CCLB, CTD, Aisin, B&W hitch, dually
2020 Keystone Montana Legacy 3813MS w/FBP ,
MORryde 8k IS, Kodiak disc brakes, no solar  YET!



RV-Dreams Family Member

Status: Offline
Posts: 5398
Date:

Gary,

It is important to know the weights at each tire, thus your idea of getting it weighed is important.  However, keep one other thing in mind that gives you some leeway with regards to GVWR on the trailer.  Both the Elite Suites and Mobile Suites are built on the same frame, suspension, axles, etc.  However, the Elite Suites models are generally heavier on their rated GVWR than the Mobile Suites, so if you are a bit over GVWR on the Mobile Suites, I wouldn't worry about it.

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 47
Date:

Brian,

No they didn't adjust the manufactured GVWR as far as I can tell based on the reductions we made in the standard unit with standard furniture. And yes that was dry weight each time.  This whole weight thing is the most confusing and frustrating part of the whole process of going on the road.

 

Terry,

That's a good point.  Adds a slight bit of comfort.

Gary



__________________

2020 Fleetwood / Southwind 36P Motorhome

2019 Jeep Cherokee Limited as toad 

Gary & Linda



RV-Dreams Family Member

Status: Offline
Posts: 47
Date:

Just an update on RV weighing.  We made our way to Texas and had our units weighed by members of RVSEF.  It was worth it's weight in gold to really find out where we were weight wise. As it turned out we are in good shape, at our limits, but at least I know where we have to adjust to reduce areas that are heavy and move stuff to areas that are light.

So thankful to RVSEF for their time and information that put my mind at ease.

Gary



__________________

2020 Fleetwood / Southwind 36P Motorhome

2019 Jeep Cherokee Limited as toad 

Gary & Linda

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us